Danish modern TM-0784 / Digital miniature

Denmark · c. 1950–1970

Mid-Century Wide Hall Console

Digital STL + 3MF files for your 3D printer. No physical item is shipped.

  • 1:12 · 1:24
  • Resin and FDM
Mid-Century Wide Hall Console — Hero view
Mid-Century Wide Hall Console — Unpainted detail
Mid-Century Wide Hall Console — Four finishes
Mid-Century Wide Hall Console — Finish comparison
Explore the shape in 3D
Mid-Century Wide Hall Console — product render

The actual print geometry, in 3D

Your next little detail.

View piece & price on Etsy

Check the included files and current price on Etsy, then purchase and download there.

Instant digital download · STL + 3MF · personal-use license

What's in the pack

  • 1:12 — STL + 3MF
  • 1:24 — STL + 3MF
  • README with starting print settings, orientation notes and the license

Dimensioned plate · Fig. 2–4

The measure of the piece.

Dimension envelopes of the supplied files, shown as front, side and plan (the full-size design when no file measurement is recorded). These are measurement diagrams; inspect the 3D view for the object’s contours.

108.3 × 37.0 mm 108.3 mm 37.0 mm Fig. 2 · Front elevation 20.6 × 37.0 mm 20.6 mm 37.0 mm Fig. 3 · Side elevation 108.3 × 20.6 mm 108.3 mm 20.6 mm Fig. 4 · Plan
Scale 1:12108.3 × 20.6 × 37.0 mm (4.27 × 0.81 × 1.46 in)
54.2 × 18.5 mm 54.2 mm 18.5 mm Fig. 2 · Front elevation 10.3 × 18.5 mm 10.3 mm 18.5 mm Fig. 3 · Side elevation 54.2 × 10.3 mm 54.2 mm 10.3 mm Fig. 4 · Plan
Scale 1:2454.2 × 10.3 × 18.5 mm (2.13 × 0.41 × 0.73 in)

Dimensions at every scale

Based on a full-size console table of 1300.0 × 450.0 × 850.0 mm. Measured mesh dimensions take precedence when available. Width × depth × height.

ScaleMillimetresInches
1:12
one-inch scale		108.3 × 20.6 × 37.0 mm4.27 × 0.81 × 1.46 in
1:24
half scale		54.2 × 10.3 × 18.5 mm2.13 × 0.41 × 0.73 in

Not sure which scale your house is? Read the scale chart. Planning the room? Compare furniture footprints.

Print information

Resin
0.03–0.05 mm layers, heavy supports
FDM
Starting point: 0.08–0.12 mm layers. Digitally screened scales: 1:12, 1:24. Separate variant: none.
Parts
1 part, prints as one piece
Supports
Heavy Supports
Footprint at 1:12
108.3 × 20.6 × 37.0 mm
Files
STL + 3MF; inspect the sliced layers before printing

First print? Resin vs FDM for miniatures · Painting guide.

More like this