Victorian & Gothic Revival TM-2218 / Digital miniature

England · c. 1837–1901

Gothic Tall Closed Pantry Cupboard

Digital STL + 3MF files for your 3D printer. No physical item is shipped.

  • 1:12 · 1:24
  • Resin and FDM
Gothic Tall Closed Pantry Cupboard — Hero view
Gothic Tall Closed Pantry Cupboard — Unpainted detail
Gothic Tall Closed Pantry Cupboard — Four finishes
Gothic Tall Closed Pantry Cupboard — Finish comparison
Explore the shape in 3D
Gothic Tall Closed Pantry Cupboard — product render

The actual print geometry, in 3D

Your next little detail.

View piece & price on Etsy

Check the included files and current price on Etsy, then purchase and download there.

Instant digital download · STL + 3MF · personal-use license

What's in the pack

  • 1:12 — STL + 3MF
  • 1:24 — STL + 3MF
  • README with starting print settings, orientation notes and the license

Dimensioned plate · Fig. 2–4

The measure of the piece.

Dimension envelopes of the supplied files, shown as front, side and plan (the full-size design when no file measurement is recorded). These are measurement diagrams; inspect the 3D view for the object’s contours.

70.2 × 158.3 mm 70.2 mm 158.3 mm Fig. 2 · Front elevation 35.9 × 158.3 mm 35.9 mm 158.3 mm Fig. 3 · Side elevation 70.2 × 35.9 mm 70.2 mm 35.9 mm Fig. 4 · Plan
Scale 1:1270.2 × 35.9 × 158.3 mm (2.76 × 1.41 × 6.23 in)
35.1 × 79.2 mm 35.1 mm 79.2 mm Fig. 2 · Front elevation 17.9 × 79.2 mm 17.9 mm 79.2 mm Fig. 3 · Side elevation 35.1 × 17.9 mm 35.1 mm 17.9 mm Fig. 4 · Plan
Scale 1:2435.1 × 17.9 × 79.2 mm (1.38 × 0.71 × 3.12 in)

Dimensions at every scale

Based on a full-size pantry cupboard of 950.0 × 550.0 × 1900.0 mm. Measured mesh dimensions take precedence when available. Width × depth × height.

ScaleMillimetresInches
1:12
one-inch scale		70.2 × 35.9 × 158.3 mm2.76 × 1.41 × 6.23 in
1:24
half scale		35.1 × 17.9 × 79.2 mm1.38 × 0.71 × 3.12 in

Not sure which scale your house is? Read the scale chart. Planning the room? Compare furniture footprints.

Print information

Resin
0.03–0.05 mm layers, no supports needed
FDM
Starting point: 0.08–0.12 mm layers. Digitally screened scales: 1:12, 1:24. Separate variant: none.
Parts
1 part, prints as one piece
Supports
No Supports Needed
Footprint at 1:12
70.2 × 35.9 × 158.3 mm
Files
STL + 3MF; inspect the sliced layers before printing

First print? Resin vs FDM for miniatures · Painting guide.

More like this