Victorian & Gothic Revival TM-1843 / Digital miniature

England · c. 1837–1901

Victorian Closed Fall Front Secretary

Digital STL + 3MF files for your 3D printer. No physical item is shipped.

  • 1:12 · 1:24
  • Resin and FDM
Victorian Closed Fall Front Secretary — Hero view
Victorian Closed Fall Front Secretary — Unpainted detail
Victorian Closed Fall Front Secretary — Four finishes
Victorian Closed Fall Front Secretary — Finish comparison
Explore the shape in 3D
Victorian Closed Fall Front Secretary — product render

The actual print geometry, in 3D

Your next little detail.

View piece & price on Etsy

Check the included files and current price on Etsy, then purchase and download there.

Instant digital download · STL + 3MF · personal-use license

What's in the pack

  • 1:12 — STL + 3MF
  • 1:24 — STL + 3MF
  • README with starting print settings, orientation notes and the license

Dimensioned plate · Fig. 2–4

The measure of the piece.

Dimension envelopes of the supplied files, shown as front, side and plan (the full-size design when no file measurement is recorded). These are measurement diagrams; inspect the 3D view for the object’s contours.

70.3 × 133.3 mm 70.3 mm 133.3 mm Fig. 2 · Front elevation 47.3 × 133.3 mm 47.3 mm 133.3 mm Fig. 3 · Side elevation 70.3 × 47.3 mm 70.3 mm 47.3 mm Fig. 4 · Plan
Scale 1:1270.3 × 47.3 × 133.3 mm (2.77 × 1.86 × 5.25 in)
35.1 × 66.7 mm 35.1 mm 66.7 mm Fig. 2 · Front elevation 23.7 × 66.7 mm 23.7 mm 66.7 mm Fig. 3 · Side elevation 35.1 × 23.7 mm 35.1 mm 23.7 mm Fig. 4 · Plan
Scale 1:2435.1 × 23.7 × 66.7 mm (1.38 × 0.93 × 2.62 in)

Dimensions at every scale

Based on a full-size secretary desk of 950.0 × 520.0 × 1600.0 mm. Measured mesh dimensions take precedence when available. Width × depth × height.

ScaleMillimetresInches
1:12
one-inch scale		70.3 × 47.3 × 133.3 mm2.77 × 1.86 × 5.25 in
1:24
half scale		35.1 × 23.7 × 66.7 mm1.38 × 0.93 × 2.62 in

Not sure which scale your house is? Read the scale chart. Planning the room? Compare furniture footprints.

Print information

Resin
0.03–0.05 mm layers, light supports
FDM
Starting point: 0.08–0.12 mm layers. Digitally screened scales: 1:12, 1:24. Separate variant: none.
Parts
1 part, prints as one piece
Supports
Light Supports
Footprint at 1:12
70.3 × 47.3 × 133.3 mm
Files
STL + 3MF; inspect the sliced layers before printing

First print? Resin vs FDM for miniatures · Painting guide.

More like this