Victorian & Gothic Revival TM-5209 / Digital miniature

England · c. 1837–1901

Victorian Long Panelled Shop Counter

Digital STL + 3MF files for your 3D printer. No physical item is shipped.

  • 1:12 · 1:24
  • Resin and FDM
Victorian Long Panelled Shop Counter — Hero view
Victorian Long Panelled Shop Counter — Unpainted detail
Victorian Long Panelled Shop Counter — Four finishes
Victorian Long Panelled Shop Counter — Finish comparison
Explore the shape in 3D
Victorian Long Panelled Shop Counter — product render

The actual print geometry, in 3D

Your next little detail.

View piece & price on Etsy

Check the included files and current price on Etsy, then purchase and download there.

Instant digital download · STL + 3MF · personal-use license

What's in the pack

  • 1:12 — STL + 3MF
  • 1:24 — STL + 3MF
  • README with starting print settings, orientation notes and the license

Dimensioned plate · Fig. 2–4

The measure of the piece.

Dimension envelopes of the supplied files, shown as front, side and plan (the full-size design when no file measurement is recorded). These are measurement diagrams; inspect the 3D view for the object’s contours.

150.0 × 52.8 mm 150.0 mm 52.8 mm Fig. 2 · Front elevation 47.0 × 52.8 mm 47.0 mm 52.8 mm Fig. 3 · Side elevation 150.0 × 47.0 mm 150.0 mm 47.0 mm Fig. 4 · Plan
Scale 1:12150.0 × 47.0 × 52.8 mm (5.91 × 1.85 × 2.08 in)
75.0 × 26.4 mm 75.0 mm 26.4 mm Fig. 2 · Front elevation 23.5 × 26.4 mm 23.5 mm 26.4 mm Fig. 3 · Side elevation 75.0 × 23.5 mm 75.0 mm 23.5 mm Fig. 4 · Plan
Scale 1:2475.0 × 23.5 × 26.4 mm (2.95 × 0.93 × 1.04 in)

Dimensions at every scale

Based on a full-size shop counter of 1800.0 × 650.0 × 1050.0 mm. Measured mesh dimensions take precedence when available. Width × depth × height.

ScaleMillimetresInches
1:12
one-inch scale		150.0 × 47.0 × 52.8 mm5.91 × 1.85 × 2.08 in
1:24
half scale		75.0 × 23.5 × 26.4 mm2.95 × 0.93 × 1.04 in

Not sure which scale your house is? Read the scale chart. Planning the room? Compare furniture footprints.

Print information

Resin
0.03–0.05 mm layers, light supports
FDM
Starting point: 0.08–0.12 mm layers. Digitally screened scales: 1:12. Separate variant: none.
Parts
1 part, prints as one piece
Supports
Light Supports
Footprint at 1:12
150.0 × 47.0 × 52.8 mm
Files
STL + 3MF; inspect the sliced layers before printing

First print? Resin vs FDM for miniatures · Painting guide.

More like this